Zero X Force Drone Start Up Calibration and Fly SIMPLIFIED

Zero X Force Drone Start Up Calibration and Fly SIMPLIFIED

In this video I show how to set up, calibrate and fly a ZERO X FORCE DRONE
because I couldn’t find a video for this drone on YouTube that would simplify the zero x force instructions and it was a bit of fun.

So sit back and enjoy the ride.

If you like this video here is the link to connecting wi fi for the zero x drone

If you like you can reach out to us on




or email us at

00:00 Introduction to Zero x Drone
00:13 what you need for the drone zero x set up
15:15 lift off of the zero x drone


  1. Peter xxx on July 8, 2021 at 11:29 pm

    good one fly and workes

  2. Gary Waddell on July 8, 2021 at 11:29 pm

    I’m glad I’m not the only one having issues with the rubbish instructions. I actually rang the company and told them that their instructions need a total rewrite. They aren’t logical, they’re full of errors and aren’t step-by-step. It assumes you already have a technical knowledge of the drone. I think they should invest in a proper instructional Youtube video. Yours is the only one out here at the moment and even you are just trying it out by trial and error like the rest of us. I might hit them up to do a youtube vid. I’ll let you know if they respond positively. Thanks for giving it a go!

  3. Ascension Rider on July 8, 2021 at 11:30 pm

    How do you connect the DAMN camera to your phone!?! I am so confused of how

  4. Josh Sparkman on July 8, 2021 at 11:32 pm

    cheers mate, very helpful

  5. Dee Wilson on July 8, 2021 at 11:33 pm

    ok, maybe im dum, you didnt say how to put the blade protectors on?? yours is the only info to be found on the force, thanku

  6. Darren Christopher on July 8, 2021 at 11:33 pm


  7. mahendra oli on July 8, 2021 at 11:37 pm

    My fav part is when he said "I’ll be a monkey’s uncle$

  8. Frank McLoughlin on July 8, 2021 at 11:39 pm

    THANKS for this video. Just got my Force drone home, tried to get it working – it wasn’t happening and I was getting "annoyed"! A few minutes of watching this and boom, I am out side with the drone and we are flying. It think they should just stop with written instructions and go YouTube…

  9. Gail Whittaker on July 8, 2021 at 11:39 pm

    Interesting and informative

  10. Wayne Tomsett on July 8, 2021 at 11:40 pm

    A word of warning “my drone started up yesterday without me needing to calibrate it so I flew it “big mistake” I flew it about 25meters up and then it just flew away and I couldn’t get it to return because without calibration it has no idea where home is ! “So if that happens make sure you turn it off and set up (calibrate it) properly “EVERY TIME”

  11. Adam Whittaker on July 8, 2021 at 11:46 pm

    Can I borrow your drone mate there’s a nudist beach near my house I’ve been wanting to check out for a while thanks mate

  12. Ivor Roberts on July 8, 2021 at 11:47 pm

    Many thanks. I had the same problem with starting the drone!!

  13. Stephen Howe on July 8, 2021 at 11:49 pm


  14. sugar daddy Shane on July 8, 2021 at 11:50 pm

    This was I’m first I got the dji mini 2

  15. Craig Munday on July 8, 2021 at 11:50 pm

    That’s an awesome demonstration mate, very helpful 👍👍👍

  16. Isaac b on July 8, 2021 at 11:51 pm

    Very clear and helpful !

  17. Corrine Mitchell on July 8, 2021 at 11:54 pm

    Hi, what’s the video of how to use the app for this drone please? Great vid btw 👍🏼

  18. leathernlace123 on July 8, 2021 at 11:55 pm


  19. Allan Woods on July 8, 2021 at 11:55 pm

    Looks like a good drone
    How high dose it go ?

  20. XxDemon23xX on July 8, 2021 at 11:55 pm

    mine is setup and works fine but just drops out of the sky after about 30 seconds.

  21. Lynette Zimmerling on July 8, 2021 at 11:57 pm


  22. Michelle Barney on July 8, 2021 at 11:59 pm

    Loved your video – it’s very helpful. I’ve got the drone flying but cannot work the app out. Did you have any trouble using it?

  23. Emanuel Kalergis on July 9, 2021 at 12:05 am

    thanks it hellps

  24. Jackish22 on July 9, 2021 at 12:07 am

    How do you have 101 subs but this video has 3.5K views

  25. Jake Bailey on July 9, 2021 at 12:09 am

    what a complete piece of crap,how can this company can sell these things when they are sooo not able to do what they say they should do…have to go thru the whole startup procedure every time it is used which is a pain but bearable but it rarely completes level and vertical correction procedures resulting in no control over drone so off it goes by itself and as seen here in the comments it just goes off never to be seen again..mine is going back to JB Hi Fi for a refund and shame on JB Hi Fi for selling these not fit for purpose products!

  26. John Healey on July 9, 2021 at 12:10 am

    Stoked with the help for the new Xmas drone for my kid. Looks like I will be the one to do most of the flying!!

  27. damien moloney on July 9, 2021 at 12:11 am

    Great video, like your style. direct with no messing around.

  28. Johnson Fiona on July 9, 2021 at 12:11 am


  29. Tony Elmer on July 9, 2021 at 12:14 am

    Thanks for this video. I received this drone as a gift. Your instructions have no doubt saved me much frustration. I am now ready to turn the drone on. 😅

  30. Daniel Jose Marie on July 9, 2021 at 12:16 am

    Hey man. Having problems with the same drone. When I press the drone power on button the lights flash and it beeps but turns off when I take my finger off the power button. Not sure what the issue is. Do you (anyone) has any suggestions?

  31. Jason S on July 9, 2021 at 12:18 am

    Hi mate do have any videos from the drone I like your video thanks Jason.

  32. Phil Lord on July 9, 2021 at 12:22 am

    Cheers. I’ve been spending flippin ages trying to figure out the lousy instructions 😎👍

  33. Brad Radlof on July 9, 2021 at 12:22 am

    Guys and girls this is a very simple drone to connect to a smartphone with and calibrate this drone I have a video link below which sums it up a lot quicker if you are just wanting to connect it to a smartphone and complete the calibration process:

  34. Edwin-E on July 9, 2021 at 12:28 am

    this is very helpful video. Cheers!

Leave a Comment