We Completely Take Apart a DJI FPV Drone | Full Teardown / Disassembly

We Completely Take Apart a DJI FPV Drone | Full Teardown / Disassembly

See our site for DJI Repairs, Parts and Accessories https://www.droneoptix.repair
I hope you found the teardown useful – comment below if you have any questions.
Droneoptix are based in the UK but ship internationally.
We always suggest getting a professional to repair your drone as it is very easy to damage the drone, or put it back together incorrectly which could result in another crash. Visit our site here to see details about our repairs – https://www.droneoptix.repair/product-category/repair
If you are repairing your drone yourself, you’ll want to check out our site for all the parts you’ll need to fix our drone and we also offer accessories like batteries and propellers for all DJI drones.
We also offer a 12 month warranty on all products and repairs.
All our profits go to charity, see here more details – https://www.droneoptix.repair/charity


  1. he214abc on July 21, 2022 at 7:34 pm

    10 times complicated than other fpv, it crashs and it died literally

  2. slogan9105 on July 21, 2022 at 7:35 pm

    just got mine , alot of engineering went into designing this machine

  3. Chasbro Chas on July 21, 2022 at 7:35 pm


  4. Aakash Jana on July 21, 2022 at 7:36 pm

    So it’s basically a delicate piece of electronic equipment that needs to be handled with care and not bashed on the ground a 1000 times like typical carbon ones. Also so deep dive into the motors should help us understand the efficiency of DJIs motors and Crack the code behind those obnoxiously long flight times.

  5. Jason Schmidt on July 21, 2022 at 7:37 pm

    I was hoping there would be some sort of camera/vtx/recording module and i could buy it separately to put on my custom quad. But it all seems to be integrated.

  6. alekhzandr on July 21, 2022 at 7:38 pm

    does anyone know what type of cable the gray one you can see at 4:25 is? is there a way to fix it once it was deplugged from its bracket? any help would be very much appreciated!

  7. RonWilliams215 on July 21, 2022 at 7:40 pm

    Excellent tear down video. Thank you.

  8. Thomas Binder on July 21, 2022 at 7:40 pm

    it is so nice i save it ….for me. 10 poins from me for this nice vid.

  9. ViAJERO Series PH on July 21, 2022 at 7:40 pm

    Hello! We would love to see DJI Air2s Teardown/ Gimbal Teardown . New subs here.

  10. Tree FPV on July 21, 2022 at 7:41 pm

    is the DJI FPV motor serviceable, i want to remove the motor c clip to separate the motor wiring from the bell to clean the motor, but idk if this is even possible

  11. Rockers2Rockers on July 21, 2022 at 7:43 pm

    It must take some time and skill to assemble this drone. Great content.

  12. A.J. Ram on July 21, 2022 at 7:44 pm

    my dji fvp crashed and now won’t come on…… anyone know what i need to do?

  13. Fox FPV on July 21, 2022 at 7:44 pm

    What Kv rating are the motors

  14. Vincent S on July 21, 2022 at 7:44 pm

    Taking it apart is the easy step. Getting it back together is another story. 😁

  15. Djordan Lucero on July 21, 2022 at 7:46 pm

    It was hard tearing it down

  16. pxl# on July 21, 2022 at 7:46 pm

    i recently crashed my drone and had to change the body of it .. it was a hell of a work for me and my shaky fingers D: but i somehow made it but now the 2 rear motors aren’t spinning when i start it and the info in the googles says that the selftest of the "drive control" doesn’t work and i should restart the drone or conntact support … any ideas what this could be ? did i frie some parts of the esc as i took it apart ? or could it be anything else ? would be nice if someone could help me out with that

  17. Josh Mobley on July 21, 2022 at 7:47 pm

    Can you do the remote controller 2 ?

    The one the comes with the drone?


  18. Carlos Diaz on July 21, 2022 at 7:47 pm

    the compass where it is located? is it possible to replace it?

  19. vales74 on July 21, 2022 at 7:48 pm

    what its that blue thing, like sticky??

  20. ravecoin on July 21, 2022 at 7:51 pm

    I want to buy some parts, do You know what part is responsible for the front arm long horizontal led? cuz it stopped working together with under motor leds. Is it the little circuit board from the leg stand?

  21. Ihtisham Ul Haq on July 21, 2022 at 7:51 pm

    When I feel and look at myself as I own one dji fpv, I love mother nature beyond anything

  22. Simeon Valenti on July 21, 2022 at 7:53 pm

    Can anyone tell me what is the minimum amount of disassembly needed, if I only want to replace the vision sensors module and ribbon cable?

  23. James Bond on July 21, 2022 at 7:53 pm

    For sone reason this video reminded me of someone eating a crab.

  24. Maredich Zinn on July 21, 2022 at 7:54 pm

    Is it possible just to extract the cam and video transmitting system?

  25. FlipB on July 21, 2022 at 7:59 pm

    Will you do Air 2S teardown soon?

  26. MIKI C on July 21, 2022 at 7:59 pm

    Hello, my drone had a fall in the sand, now there is no image and it also has no connection with the glasses or the control, what could it be? please help me. Greetings from Chile

  27. Buster Jaros on July 21, 2022 at 8:00 pm

    What are the side antennae? How are they different from the antennae in the “feet.”

  28. Gus Cruz on July 21, 2022 at 8:01 pm

    My drone took a swim the other day. Won’t power up. Which parts do I need to replace?

  29. Lamka Gaming Club on July 21, 2022 at 8:02 pm

    If anyone can design a carbon fiber frame to fit all these electronics that will make the drone more durable, it would be Chris from Armattanquads

  30. I See It All FPV👁DRONE on July 21, 2022 at 8:05 pm
  31. Active6 K on July 21, 2022 at 8:05 pm

    Yup watched this video yesterday. Today i broke front left and back right arm

  32. peter Baek on July 21, 2022 at 8:07 pm

    I got an error message on my goggle after an impact…. saying, "image transmission signal weak" or "image transmission signal lost". Do you know which parts should I replace by any chance?? I replaced the gimbal today, but same error again….

  33. DRONE CLUB BD on July 21, 2022 at 8:08 pm

    well done brother .. need you to upload all model video

  34. Johnny on July 21, 2022 at 8:09 pm

    First guy I ve ever heart calling the arms legs. Great video otherwise

  35. Rafael Barbosa on July 21, 2022 at 8:09 pm

    Hello, I’m from Brazil, I have the dji goggles and I need to repair the back button, do you know where the BLD1920 board is sold.

  36. DroneOptix on July 21, 2022 at 8:14 pm
  37. Dan Hugelier on July 21, 2022 at 8:15 pm

    Teardown and rebuild on a 5 inch carbon fiber frame. Maybe some 3d parts. That would be fun to see.

  38. J Boy FPV on July 21, 2022 at 8:16 pm

    Great video !! Would the antenna wire that hooks up to GPS board keep the drone from turning on if it was cut in half from a crash ? The heat sink module mounting tabs broke and pushed over cutting the left ADS-B Antenna wire. Hope you can help. Thank you for making this video.

  39. william gutierrez on July 21, 2022 at 8:22 pm

    Me suscribo solo por qué me fascina desarmar todo igual que en video y te doy un súper 👍 cuando me compré me primer dron que fue un plantón 3 pro a los dos días ya lo desarme pero es muy chebre mirar como está compuesto buen video 👍

  40. Ronny Rengkung on July 21, 2022 at 8:22 pm

    Nice Video…….! are TearDown the Remote too??…. Thanks.!!

  41. Petter Bruland on July 21, 2022 at 8:23 pm

    Ordered replacement parts. Crashed it into 60 mphs into power lines, and found the drone after 90 minutes of searching. Busted arms and battery missing. The battery falls out a bit too easily, perhaps by design. Anyhow, thank you for a detailed video. Will be watching it a few times soon 🙂

  42. Joao Victor F. Carvalho on July 21, 2022 at 8:23 pm

    Hey, do you think it is possible to take apart the video transmitter from the dji drone and the camera and make it work in another non dji drone? Or it might be some signal necessary feom the MB for it to work?

  43. Ardren on July 21, 2022 at 8:24 pm

    Great video. It looks over-designed, and poorly constructed.

    I really don’t understand DJI. They have so much talent, technology, and experience, but seemed to have significantly missed the mark. It could have been a great product if they scaled everything back a bit and spent anytime (at all) on toughness, modularity and repairability.

  44. قراءات خاشعة on July 21, 2022 at 8:24 pm

    Can a third party company make for this a carbon fiber body?

  45. Proton Mam on July 21, 2022 at 8:27 pm

    Why is this giving me anxiety in 2025?

  46. uptowndisco2 on July 21, 2022 at 8:27 pm

    I am in the UK , I have a Yuneec H that will not power up after being in storage , no startup sounds etc , batteries have been tried in another Yuneec H Hex and work fine , do you think you would be able to repair this Drone or would cost bake it not worthwhile ?

  47. JT Winters on July 21, 2022 at 8:27 pm

    I wonder if anyone had taken the hardware and installed them into a different body. Maybe one less prone to breaking and lighter?

  48. Stylee Productions on July 21, 2022 at 8:27 pm

    Where is the vtx?

  49. PortEL Gate 9 on July 21, 2022 at 8:29 pm

    So if you break an arm you’re fucked

  50. Manuel Gernaert on July 21, 2022 at 8:30 pm

    Did you also opened the remote?!
    Would like to see how the remote works with the small Sticks inside.

Leave a Comment