50 Comments

  1. it might be him on September 15, 2020 at 11:19 am

    im a beginner, i dont have nothing. can you give me all the things i need for vortex 250 pro so i would dont need to buy enithing after that and ill know thats its work?

  2. Benjamin Stephens on September 15, 2020 at 11:21 am

    can i use a spektrum receiver with this even though its not ppm. do i need a ppm module on my dx9?

  3. 25trajcer on September 15, 2020 at 11:22 am

    is it possible to setup the vortex pro without the goggles or the screen ?

  4. chad henry on September 15, 2020 at 11:26 am

    wer can i i find the info on ppm rx i dont know all of that stuff can you guys make a vid on it
    thanks

  5. BRAHIMY on September 15, 2020 at 11:26 am

    hey guys what kind of battery do you use and what charger ??

  6. Rocky 009 on September 15, 2020 at 11:27 am

    Why’d you remove it from the store?!?!

  7. TechWitaTwang on September 15, 2020 at 11:27 am

    you and mentioned you was going to put a link to a beginner’s drone and the description and I did not see anything.

  8. soomeee on September 15, 2020 at 11:28 am

    If your getting into full sized fpv, get a bfight 210 it’s way less expensive

  9. Ebikefe on September 15, 2020 at 11:30 am

    Thanks for sharing. What display monitor is that?

  10. Montoya Man on September 15, 2020 at 11:30 am

    Does this drone have a panic mode or button so that it comes back to base

  11. drew Douglas on September 15, 2020 at 11:32 am

    Looks like a lot of glitches in the video feed

  12. DeHaas on September 15, 2020 at 11:33 am

    i like the build but i really dont like the camera, could i change it?

  13. doktor drone on September 15, 2020 at 11:35 am

    thank you 🙂

  14. Rocky 009 on September 15, 2020 at 11:36 am

    I bought one from you guys, thank you

  15. J Daithi on September 15, 2020 at 11:37 am

    Any cheap rc radios for this quad?

  16. TORSTRUP97 GAMING on September 15, 2020 at 11:37 am

    can i use a devo 7 transmither

  17. Alex Dalton on September 15, 2020 at 11:37 am

    Can you plug it into a GUI to check the everything is in the right direction

  18. Jeff Lanz on September 15, 2020 at 11:40 am

    after I set it up I keep getting a beeping sound and when I test the with props off I will rase throttle and moters speed up but when I lower throttle the moters seam seem to stay at the same speed if I max out the throttle and lower it it stays max witch wories me as I do not want to put puplers on and have it flay off and it keeps going until I dissarme any help would be do grate

  19. Frank V on September 15, 2020 at 11:41 am

    Looks like a nice quad! The setup method is promising indeed. But I have my doubts about the cam quality. Is a brand-specific or is it easy replaceable with a more quality cam (800tvl)? Has this quad a 25mW transmitter?

  20. LeTrucky on September 15, 2020 at 11:41 am

    hello, compatible 9xR / frsky ? thx

  21. Usbombs on September 15, 2020 at 11:42 am

    So, how do the flips work in acro mode? I’ve been flying beginner drones, and I’d like to try some more advanced ones.

  22. Ben Foggon on September 15, 2020 at 11:43 am

    does it come with the vr headset

  23. Bill Hilly on September 15, 2020 at 11:43 am

    what monitor is that

  24. Dylan Bogusz on September 15, 2020 at 11:46 am

    Is it possible to set up a vortex 250 without any FPV or monitor set up?

  25. Alex Dalton on September 15, 2020 at 11:46 am

    Instead of a beginner grabbing a 3s why not go 4s but turn down you max throttle to fly like a 3s

  26. bomberze on September 15, 2020 at 11:49 am

    nice Quadrocopter. maybe, thats my next one 🙂

  27. GoatZilla on September 15, 2020 at 11:51 am

    lol

  28. Robert Gardiner on September 15, 2020 at 11:51 am

    Good videoIs this better than walkera runner pro 250

  29. BRAHIMY on September 15, 2020 at 11:52 am

    Hey Josh great review, i am looking to get this Quad and was wondering if you could do a video of how to set up the quad to your fatshark goggles !
    thanks

  30. ipscone on September 15, 2020 at 11:52 am

    What is the box with display that you are using?  How is it connected to the Vortex 250 Pro.  By RF or cable?

  31. Michael Petale on September 15, 2020 at 11:53 am

    Great info guys!👍👍👍👏

  32. Paul Grimard on September 15, 2020 at 11:54 am

    Your camera man have Parkinsons? get a tripod or lessons,.. wow

  33. Fr0sTy on September 15, 2020 at 11:54 am

    I want to get a Vortex 250 Pro but i’m a bit curious on how you can access the Wizzard without that TV you had.

  34. Growler Drones on September 15, 2020 at 11:57 am

    i think how sober you look makes me want to trust you. thank you for your dedacation

  35. Brandon Hill on September 15, 2020 at 11:58 am

    I just bought this from a good friend that got out of flying and he couldn’t remember how to arm the drone and I tried to arm it and it won’t arm any suggestions

  36. bikemaniac on September 15, 2020 at 11:58 am
  37. Real Fonzo on September 15, 2020 at 11:58 am

    Guys im a noob at this, does this have gyro?
    Can you fly a race drone with gyro?

  38. Mauricio Torres on September 15, 2020 at 12:01 pm

    Hello I need your help I recently acquired a spedix 250 pro and I have a rc spektrum, both are linked but I can not activate functions. How can I make it work?

  39. Mr Anonymous on September 15, 2020 at 12:01 pm

    Taking off the props while setting up best advice! If you want to keep your fingers…

  40. MaxFawk777 on September 15, 2020 at 12:03 pm

    Is the setup wizard included in the box?

  41. viking Selph on September 15, 2020 at 12:03 pm

    hi, I know I’m seeing this late. I was wondering if you made the advanced tune video with the different switch setups? I’m wanting to dial mine in, I have the 285 and the 250. I’m mainly wanting to know​how to make a switch for horizon and acro, and an arm switch. thanks. also thanks for the great videos you guys are awesome!😎

  42. kam hagh on September 15, 2020 at 12:03 pm

    I wish they could do something about the video stream it’s so awful

  43. AzT3r on September 15, 2020 at 12:04 pm

    Uh does the fpv flicker like that with goggles?

  44. Cavin Sihombing on September 15, 2020 at 12:04 pm

    how you to put action cam make the toturial video pls!!!!

  45. Skye Fuego on September 15, 2020 at 12:06 pm

    do you really need a computer if you buy a drone?

  46. Erik on September 15, 2020 at 12:10 pm

    if i but the luminier kit will i get the receiver and transmitter? for the versacopter

  47. Malcolm Dickinson on September 15, 2020 at 12:10 pm

    Any ideas how to add lost buzzer to Vortex 250 pro and why cleanflight will only connect with flight battery connected?

  48. Montoya Man on September 15, 2020 at 12:15 pm

    Why do u take props off for setup

  49. Alex Dalton on September 15, 2020 at 12:17 pm

    Y the hell isnt my FPV working lol lenders cap been there

  50. JWKS2003 on September 15, 2020 at 12:17 pm

    If I were to switch those props out for KingKong 5040 3Blade props, will the lock nuts that come with the quad work be able with them? if not which lock nuts should I get? And what tool should I use to get them off? Thankyou for the video, Really helpful 🙂

Leave a Comment