Under $100 FPV Drone Build That's Already Built | $88 Quad 😲

Under $100 FPV Drone Build That's Already Built | $88 Quad 😲

🛒 $88 Quad – http://bit.ly/88QUAD
📡 RX – http://bit.ly/3qpIXLb
💧 Session 5 Mount – http://bit.ly/3Mmncna
🔶 Props – http://bit.ly/3xlQm1D
🔎 Wide Angle Lens – http://bit.ly/3msWaAj

📺 Setup Video… http://youtu.be/gN5vivzDZC8

📝 CLI Dump – http://bit.ly/3x6IjEt
*use with caution… if your setup is different in any way from mine,
you can damage your quad or worse hurt yourself. TEST WITH PROPS OFF!

🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks!

💲 If you enjoy my content, please support my channel through these links
Patreon – http://www.patreon.com/albertkim
Amazon – http://amzn.to/3zq84zp
RaceDayQuads – http://bit.ly/RDQ-BF
Pyrodrone – http://bit.ly/3Bfo3BP
GetFPV – http://bit.ly/3wWbziq
Banggood – http://bit.ly/3imXlie
Airblade – http://bit.ly/3ilYVRr
NewBeeDrone – http://bit.ly/3BhFdPu
Makerfire – http://bit.ly/2VGI3Kg
Aliexpress – http://bit.ly/3im17IF
XT-XINTE – http://bit.ly/3inl7KQ
Insta360 – http://bit.ly/2VRDNe5
PayPal – http://paypal.me/marblekit

👉 Old gear for sale here – http://bit.ly/AlbertGearFS

👉 Follow me on social
🐤 http://www.twitter.com/albertkim
📸 http://www.instagram.com/marblekit/

🛒 Check out my Amazon store FAVS – http://amzn.to/3zq84zp

💲 Banggood Coupons
Toys Hobbies and Robot:BGRCNew11 11%OFF (new customer)
RC Drones :BGRCDrones6 6%OFF
RC Parts :BGRCParts8 8%OFF
Eachine :BGRCEachine 10%OFF

▼ Latest Tutorials
Betaflight 4.1 Upgrade Guide – http://youtu.be/JP88ci9lJ6w
Diagnose Motor/ESC Issues – http://youtu.be/5KaY_1Kd328
Basic BNF Drone Setup – http://youtu.be/19i8ob7u3rE
How to bind SPI receivers – http://youtu.be/f0pRPqDv25I
RPM Filter Quick Start – http://youtu.be/JkBa7v7qWus

▼ My Favorite Drones
HM Crux35 – http://bit.ly/3BWT7qX
HM Mobula7 1S ELRS – http://bit.ly/3vwtn3c
HM Larva-X – http://bit.ly/2KV6ihJ
GEPRC Baby Crocodile 4 – http://bit.ly/3Mj4A94
GEPRC Smart35 – http://bit.ly/3IsI9Mn
GEPRC CineLog30 – http://bit.ly/35Cc0TG
GEPRC CineLog35 – http://bit.ly/3M81ncf
HM Mobula6 – http://bit.ly/2s13CKn
Diatone Taycan C25MK2 – http://bit.ly/36Okzvu
Diatone Roma F35 – http://bit.ly/3ti26yL
BETAFPV Meteor65 – http://bit.ly/3M3UMQd
BETAFPV X-Knight35 – http://bit.ly/3M41K7P

▼ RC Gear (Daily Drivers)
Radiomaster Zorro – http://amzn.to/3sg70fx
Skyzone SKY04X Goggles – http://bit.ly/Skyzone04X
Foxeer 15cm Antenna – http://bit.ly/2FRWVkM
Triple Feed Patch Antenna – http://bit.ly/2P1wMyq
Best Charger – http://amzn.to/32QgQck

▼ RC Gear (BEST Budget Options)
Radio – http://bit.ly/3qCSbCP
Goggles – http://bit.ly/3lrjT3x

▼ Tools
3D Printer – http://bit.ly/3f62poi
Awesome & Cheap Tool Kit – http://bit.ly/2U2CS4G
Electric Screwdriver – http://bit.ly/2OBa9k3
Cloth Tape – http://amzn.to/2JpCx5U
Soldering Station – http://amzn.to/2Pn5J1v
Portable Soldering Iron – http://bit.ly/2WybP2w
63/37 Solder – http://amzn.to/2De9rsz
Smoke Stopper – http://bit.ly/2Zyj680

▼ Camera Gear
Sony ZV-1 – http://amzn.to/3Mk8xdm
Sony A7Siii – http://amzn.to/3CfQVLm
DJI Osmo Pocket – http://amzn.to/2Q5xGiv
GoPro Hero 10 Black – http://amzn.to/3vzwxDG
GoPro Hero 8 Black – http://amzn.to/2VRksqN
Insta360 GO 2 – http://bit.ly/3HhNC7i
Insta360 ONE X2 – http://amzn.to/35pxVxJ
Galaxy Note 20 Ultra – http://amzn.to/3b1f8Hq

▼ My Camera Drones
DJI Mavic Mini – http://amzn.to/2NLF7Zm
DJI Air 2S – http://amzn.to/2UosklW

My video editor – http://amzn.to/3BE7vDk
My editing PC – http://amzn.to/301FYLR

👉s u b s c r i b e – http://bit.ly/2QH0OZt

💰 d o n a t e
Donate via PayPal – http://paypal.me/marblekit
Bitcoin – 12Y5vysDMvgqX4Z7h7iRTsgwWoCNwv9MPs
Ethereum – 0xD8f3758678F3d93539F804e36811f0A04B0D047F
Litecoin – LcyGPS2f3NZxWU6BRkCJ5qdk1zV6jUCtn8

👉PLAYLISTS
FPV Camera Reviews – http://bit.ly/2Nb9WIh
Micro Drone Review – http://bit.ly/2O2FTOH
ExpressLRS Playlist – http://bit.ly/370CYSH
Frame Review – http://bit.ly/2O48KSU
Quadcopter Builds – http://bit.ly/2O55ypY
Tutorials – http://bit.ly/2NYJy01
Haul Time – http://bit.ly/2O2Hkwz

Disclaimer: Some links used are affiliate links from Amazon, Banggood, and others.
We get a small commission on any sales which helps support our channel… and it costs you nothing extra.

#88quad #cheapFPV #budgetFPV

50 Comments

  1. Gabriel Alejandro on September 7, 2022 at 8:33 pm

    I’d have loved if you showed the cost of the controller and the headset aswell.

  2. Epic Drone Media By DeMoNSe3d FPV on September 7, 2022 at 8:34 pm

    Thanks for the video! Specially for us third world pilots, greetings from México!

  3. James Flores on September 7, 2022 at 8:34 pm

    Damn a ccd cam??? That is old. Dang. I

  4. Sebastian Rodriguez on September 7, 2022 at 8:35 pm

    does it comes with a controller and glasses, if not wich ones you recomend

  5. Madmacs FPV on September 7, 2022 at 8:36 pm

    hey man, i think a whole lot of beginners will buy this, so, a vid like this giving them a fighting chance of a good experience is important. good job, should maybe just suggest another esc to help them out. also you should name it in the title so they find this?

  6. Asher's Workshop on September 7, 2022 at 8:36 pm

    Considering buying this

  7. Scotty2Quady on September 7, 2022 at 8:38 pm

    You can get a few of these, slap DJI in it, Runcam 5! Basement PID tune will be a must and you got a winner for some good Flow around tall structures, trees, and water.

    You break it, who cares. Get some good footage as long as you can and use another backup. This is perfect for my mindset!

  8. BlackHawkEye676 on September 7, 2022 at 8:38 pm

    Hello, what’s the weight of the drone (in kg)

  9. Kevin Cespedes on September 7, 2022 at 8:40 pm

    What kind of battery does it takes?

  10. made in mono only employees on September 7, 2022 at 8:41 pm

    Will it work with radio master tx12 I’m very new to fpv someone pls help me

  11. Coyle on September 7, 2022 at 8:43 pm

    what receiver is in this?

  12. Tomica on September 7, 2022 at 8:43 pm

    Flies pretty well if you consider the price. Maybe with a bit more work on PIDs would be nice, but for a begginer this is more than enough.
    Good jobe mate!

  13. mani kay on September 7, 2022 at 8:44 pm

    yep more content please!…i just watch your video 20min after you posted it 2 days ago and bought the bird the same night!! it’ll be my first 5in! i already have a mob7,cine8, novice2 v2, tyro69 but now with a 5in i’ll get to the big league!! buying tonight a foxeer razer mini to upgrade the camera,12pairs of Gemfan 51466 V2. also note that as of the day i bought it the seller told me they upgraded the esc to 40amp which i think is good news!

  14. Rafael Gil on September 7, 2022 at 8:44 pm

    Great content dude. I would love to see long term review on this one in case you keep flying it.

  15. abcdef bcdefg on September 7, 2022 at 8:47 pm

    I just picked one of these up, and i guess theyve upgraded the stack to the tyro129 FC, 40aESC, and VTX with the same 2306 2450kv motors. Would it still be advisable to use your tune and settings?

  16. VOODOO SURVIVAL on September 7, 2022 at 8:49 pm

    as a noob too drones but long time rc hobbyist and HQP individual i love these kinda builds. cheap to get into and lots to learn with these builds. learn the kit and programming and build to suit your needs. everyone has to start somewhere. i have a few builds under my belt now but i’m always looking for stuff to help develop my skills on the tech side of drones. keep on keepin on!

  17. Adam Smith on September 7, 2022 at 8:51 pm

    Is that orange thing on the drone called a frame? And is the frame used to help protect the drone? I’m new to a RPV and drones in general and I’m trying to figure out all the parts and how they work as much as possible.

  18. Amin0 _Acid on September 7, 2022 at 8:54 pm

    Late to the Party, Thanks for the video, the tuning part is good to know. These quads really caught my eye for the price. I’ve ordered their UR23 and run 4s Max, it didn’t last long but only because I’m new and I wadded it hard. Busted an arm and buckled a motor, 100% my fault. If you are learning and are analog AND want to do it for a budget TCMMRC quads are hard to beat. The Glowstick Yellow Props are awesome for Display, I didn’t like them for flying, Gemfan Hurricane FTW. I myself don’t mind if these are recycled Wizard 220’s or any older quads. F4 FC’s are still supported by Betaflight spend a little time watching and reading online to set up a basic tune and these fly fine. Good learning if you don’t want to jump in with soldering right away and just want to set up and fly. You do need to add a RX to most of their quads.

  19. Albert Kim on September 7, 2022 at 8:56 pm

    🛒 $88 Quad – http://bit.ly/88QUAD
    💧 Session 5 Mount – http://bit.ly/3Mmncna
    🔶 Props – http://bit.ly/3xlQm1D

    📺 Setup Video… http://youtu.be/gN5vivzDZC8

    📝 CLI Dump – http://bit.ly/3x6IjEt
    *use with caution… if your setup is different in any way from mine,
    you can damage your quad or worse hurt yourself. TEST WITH PROPS OFF!

    🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks!

    💲 If you enjoy my content, please support my channel through these links
    Patreon – http://www.patreon.com/albertkim
    Amazon – http://amzn.to/3zq84zp
    RaceDayQuads – http://bit.ly/RDQ-BF
    Pyrodrone – http://bit.ly/3Bfo3BP
    GetFPV – http://bit.ly/3wWbziq
    Banggood – http://bit.ly/3imXlie
    Airblade – http://bit.ly/3ilYVRr
    NewBeeDrone – http://bit.ly/3BhFdPu
    Makerfire – http://bit.ly/2VGI3Kg
    Aliexpress – http://bit.ly/3im17IF
    XT-XINTE – http://bit.ly/3inl7KQ
    Insta360 – http://bit.ly/2VRDNe5
    PayPal – http://paypal.me/marblekit

    👉 Old gear for sale here – http://bit.ly/AlbertGearFS

    👉 Follow me on social
    🐤 http://www.twitter.com/albertkim
    📸 http://www.instagram.com/marblekit/

  20. Q on September 7, 2022 at 8:58 pm

    This is cheaper than a full tank of gas….

  21. Philipp Weimann on September 7, 2022 at 8:58 pm

    This is wonderful no matter where you’re at in your own FPV journey. Thank you for taking the time and efforts towards making this video, I’ll say for myself, I’d love to see more of these, I’m sure they’re others who feel the same; thanks again!

  22. Joel Farrelly on September 7, 2022 at 8:58 pm

    I might pick one of these up as a bash around quad and keep my other 5 in as a nicer long range setup. Nice vid, I enjoyed it

  23. mani kay on September 7, 2022 at 8:59 pm

    can anyone recommend a M12 lens that will fit and improve the FOV? thx

  24. gargola conrad on September 7, 2022 at 8:59 pm

    For $105.00, it’s actually not that bad. You just have to add a little sweat equity, and you’ll have a decent quad. The flight video looked like it will give you some good flights. Thanks for taking the time to figure out how to make this quad a better quad for the money.

  25. The Topic on September 7, 2022 at 8:59 pm

    What kind of battery did you use?

  26. Hologram Tupac on September 7, 2022 at 9:05 pm

    I’m considering grabbing this as my first drone cos im on a budget. Being aware of the caveats I’m happy to try manage them. If it blows up well its not too much money down the drain at least. If it works then I don’t have to stress as much about crashing it while I learn to fly either.

  27. Aero Squad on September 7, 2022 at 9:06 pm

    If you are new to this hobby, you should but this because you need something you can beat up when learning. Thanks for the video!

  28. Steve C on September 7, 2022 at 9:06 pm

    Looks like Irvine Great Park… Greetings from Mission Viejo! Thanks for the excellent content as always.

  29. Lolpj Gbvjjvh on September 7, 2022 at 9:06 pm

    what type of drone is it, sorry thats kind of a dumb question, is it analog or digital and 2.4ghz or 5.8ghz?

  30. Asher's Workshop on September 7, 2022 at 9:06 pm

    I’m interested

  31. Mark's Workbench on September 7, 2022 at 9:07 pm

    can you use the default props if you run it on a 3s lipo?

  32. j1seki on September 7, 2022 at 9:08 pm

    Can you make complete set up for this drone cuz me as begginer have no idea which controller ,battery or googles to use and no idea to how to configure those

  33. erich on September 7, 2022 at 9:08 pm

    Thanks for this video. I have been doing a lot of comparison and asked TTMRC some questions on Aliexpress. I think I will give the UF6 5′ quad a try. It has lower KV motors than this one, 50A ESC and 600mw VTX

  34. Asylum Fpv on September 7, 2022 at 9:08 pm

    Long story short, you get what you pay for. Still a good banger for the money, IF you you actually know what your looking at in BF. That said, if you know what your looking at in BF, would you be looking at a 100 buck bnf??🤔🤷‍♂️ Thanks again Albert stay awesome

  35. DroneDelirium on September 7, 2022 at 9:09 pm

    I would love to see a video converting it to DJI!

  36. Rodrigo Correia on September 7, 2022 at 9:15 pm

    Hi there, thanks for the video.
    What is the battery you are using? (mah, C rating and cell number)
    Also What mah energy do you recommend?

  37. Terry Burnett on September 7, 2022 at 9:15 pm

    Had to fall back for this one. Flies nice, if I was new new pilot follow your setup I would get two for the price of one nice drone. Get your crashing out of the way and when get a nicer drone later.

  38. Roberto Camacho on September 7, 2022 at 9:17 pm

    Hey, in these times we gotta save wherever we can. I love budget build videos!!!!

  39. John Kurpiewski on September 7, 2022 at 9:18 pm

    Thanks you. I just bought my 1st 5” !!! I can’t wait to get this . I hope it comes quick .

  40. Dan Hyatt on September 7, 2022 at 9:18 pm

    Would love to see if it is possible to install inav or ardupilot on this because it has the OmnibusF4! Thanks for another great video

  41. gustavo on September 7, 2022 at 9:21 pm

    I’m looking for a quad to train and give my nazgul5 some relief, which one do you think would be more interesting this one in the video or a happymodel crux35 ??

  42. Ben Baker on September 7, 2022 at 9:22 pm

    Note: they changed the props, flight controller and esc all to a slightly better spec. esc is now 40A so likely no need for the motor output cap

  43. Black Ben on September 7, 2022 at 9:23 pm

    Thank god when i search Build fpv drone u came up. Excellent video, The drone looks really good for my first Fpv. Can u please help about few stupid questions?
    Can u provide some links for the items from banggood or amazon because the shipping costs from USA to Europe is absolute madness.
    I need everything 😀
    a receiver, controller , goggles , propellers ,battery and charger and all of that in a budget price 😀
    Plz dont hate me

  44. NQ0A Mark on September 7, 2022 at 9:23 pm

    This was actually a very helpful video. For a beginner like me this would be a good way to learn and tinker without breaking the bank. They must of had a bunch of these parts and just put this quad together to liquidate the stock, because with all of the issues now with supply chains and parts I don’t know how they did that for that price. I may have to consider this just as a learner project where I don’t have to sweat the price of getting into a five inch. Thanks Albert, it gave me something to think about tonight…Cheers.

  45. Rachel Dolezal on September 7, 2022 at 9:26 pm

    I would actually like to see more on this quad. Reason being that I am getting into the sport and would like to learn without destroying an expensive quad. So I will likely pick one of these up soon and use it once I have a good amount of time in the sim. This seems to be the best entry level basher ive found so far.

  46. Mark's Workbench on September 7, 2022 at 9:27 pm

    I bought the runcam 5 orange and this tcmmrc drone. As for the mount, will any mount work or are there just no holes to screw in the mount? (tysm for your quick and helpful responses)

  47. Björn Bylund on September 7, 2022 at 9:30 pm

    I think this was a very good and informative video. Thanks for it!

  48. Rodolphe St. Preux on September 7, 2022 at 9:30 pm

    For the price, for what you get, it’s worth it.
    Yea it needs a little work but what quad you build at home doesn’t. With this quad I’d say 90% of the work is done for you.

    The parts are older but someone getting into fpv would be looking for parts on a budget which tends to be older parts (not stone age old, but relatively older).

    Now someone can simply pick tunes right out of betaflight.
    As long as you don’t send it to the moon it should be fine.

  49. meir deaph on September 7, 2022 at 9:30 pm

    Whoa thats scary fast! Such awsome flying n so cool seeing the orange baloon. In tje sir behind u

  50. Hologram Tupac on September 7, 2022 at 9:31 pm

    The product listing on ali now shows new parts:
    Flight Control: F4129 (new upgrade)
    ESC:E50129 4IN1 40A (new upgrade)

    I take this means your CLI dump will no longer work or is no longer appropriate to use? Would this 40A ESC be sufficient to handle these motors now?

Leave a Comment