Make a DRONE – FULL Guide – All eBay parts (~150$)

$2 for 5PCBs (Any solder mask colour): https://jlcpcb.com

This is not a “homemade drone” since I’ve used eBay parts. But in case you want to mount your own drone, well, here is the guide you need. If you have any quuestion, post that below and check the links as well.

Help my projects on Patreon : https://www.patreon.com/ELECTRONOOBS
my Q&A page: http://electronoobs.com/eng_preguntas.php
Facebook page: https://www.facebook.com/Electronoobs
Canal en Español: https://www.youtube.com/channel/UCL_QvUUeriC6q610RCXDlSQ

——————LINKS——————–
Tutorial webpage: http://electronoobs.com/eng_robotica_tut15.php
Schematic PPM: http://electronoobs.com/eng_robotica_tut15_sch1.php
Schematic PWM: http://electronoobs.com/eng_robotica_tut15_sch2.php
Part list: http://electronoobs.com/eng_robotica_tut15_parts1.php
Baseflight: https://chrome.google.com/webstore/detail/baseflight-configurator/mppkgnedeapfejgfimkdoninnofofigk

——————–PART LIST——————–
Drone STL 3D body: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338106513&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FQuadcopter-Drone-Multi-Copter-F450-HJ450-DJI-Kit-Frame-Suitable-for-KK-MK-MWC%2F162856106142%3Fepid%3D26009516364%26hash%3Ditem25eafaf89e%3Ag%3ARIIAAOSw4QdaXcCc
Afroflight flight controller: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338106513&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FNAZE32-REV6-Full-Version-Flight-Controller-32bit-Processor-w-Barometer-Compass%2F322013155847%3Fhash%3Ditem4af97ad207%3Ag%3AZDMAAOSwmOJaK6Ad
4 ESC + 4 Motors: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338106513&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F4pcs-30A-SimonK-firmware-Brushless-ESC-4X-2212-920KV-Brushless-Motor-Multirotor%2F351944734409%3Fhash%3Ditem51f18a76c9%3Ag%3Af2wAAOSwTA9X83EA
LiPo battery: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338106513&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FZippy-Flightmax-1500mAh-3S-20C-Lipo-Battery-Pack-Free-Postage-EU-Seller%2F233147088086%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2648
Power distribution: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338106513&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FXT-XINTE-Mini-Power-Hub-Power-Distribution-Board-PDB-w-BEC-5V-12V-for-QAV-FPV%2F121990206276%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649
RC controller: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338106513&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FFlysky-FS-i6-2-4GHz-6CH-remote-control%2F223435543044%3Fhash%3Ditem3405cbd204%3Ag%3AMaYAAOSwFfJcfh6X
Propellers 1045: https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338106513&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F2Pairs-10×4-5-1045-Nylon-CW-CCW-Propeller-Prop-for-Multicopter-QuadCopter-Black%2F231444430202%3Fepid%3D1638399827%26_trkparms%3Dispr%253D1%26hash%3Ditem35e329bd7a%3Ag%3AYUQAAOSw88xaRRGH%26enc%3DAQADAAAB4KX%252FKt4E1xf3SDqEdBclaYY4%252FDdu9slTLCfXV0tXHUUZyP1%252FxzzzX47v0ROygEQLT9qQExnK%252BokCAm3ahcncB928XViBByBpy7nWfN%252Fg6Rh7Kx52Sxe1%252BIy%252FrfVMHyBM%252FTnCRxDxp4xREbO0Y2ATYfjXoJwqCsPiiVJkCSB6bQEWWhfXiWZ9BLAogXapFanzqXG6nI5mn%252Bp0jPwGuyiTUn4WFrx1IX3j9tWUALg92B9VrfBcLkgcZnuBC67pGJuUrij4oaqbaVzGjMYH39TgOiJNELuEw5jRrl82ZfALNe8BwYrU%252BX0xq8tBbUHQuCz4b3AY1LpHf3%252BIcxYxfwzrDBuDNJjtfjDr0xyJfJt%252BmTGdwT2sAr4ZQesnh4VI13fMIE%252BJPZYm4AZ%252BiVss1mYrGbC3ABSr9Q1TI%252F5BK%252BgK9lgz%252BfvJTdcHqCgrPj45Mqm%252FprlzTmspXYkqox0OBiN4F9gIhLmq1XWJPB4Sr65eIOco3MO35RwJI%252B2Sw%252FbXtNLcsP7Bw084YsQ4bde%252BEsJAoKbCV2rRK%252BJgLv603G5fpK23%252FOcK%252BLoO8ie22SOkRz9gqRpUxxByb9Sl8bj29%252B1YtveZ1XQo7HcxGNcNy2zIxwL8NoOdVNnE%252FYF5vPbQzYWj5A%253D%253D%26checksum%3D231444430202c6857c1cd02944f89920a21f523cfbf7

PRINTERS
————————————-
Alfawise U30 (150€): https://www.gearbest.com/3d-printers-3d-printer-kits/pp_009954647322.html?wid=1433363&lkid=18226130
Coupon: “GB3DU30”
Ender 3(155€ AMAZING): https://www.gearbest.com/3d-printers-3d-printer-kits/pp_1845899.html?wid=1433363&lkid=15361952
Creality CR20: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_009553118595.html?wid=1433363&lkid=16797606
Coupon: “72HCR20”
Crealitu CR10 (328€): https://www.gearbest.com/3d-printers-3d-printer-kits/pp_441281.html?wid=1433363&lkid=18226147
Coupon: “GB3D1201”
Coupon: “GBCR10STY” or “GBCR10STY”
Creality CR10-mini (287€): https://www.gearbest.com/3d-printers-3d-printer-kits/pp_778274.html?wid=1654075&lkid=15865430

Like share and subscribe to motivate me. Thank you

#drone
#naze32
#tutorial

50 Comments

  1. dinesh j on April 28, 2021 at 1:38 am

    Hi bro..I am from India..watch this link https://youtu.be/gBfXA32p4FY
    ..the video is in the regional language tamil. In this video he explains that he had invented nano transfomer, we can handle the live wire which wont make any electric shock and it wont get trip..is it possible??..please explain the science behind.

  2. Father Grigori on April 28, 2021 at 1:43 am

    dude you are mint.

  3. Addictiongamer- 69 on April 28, 2021 at 1:43 am

    Hey noob could a make a Arduino base walkie talkies ????

  4. Drone Mesh on April 28, 2021 at 1:43 am

    For $150 you can make a 150kmh drone these components are outdated and unusable. You had terrible jello in your footage.

  5. Frank John on April 28, 2021 at 1:43 am

    why the baana there.

  6. Barry Mayson on April 28, 2021 at 1:44 am

    Maybe to reduce weight you could use plastic screws? Throughout.

  7. Amal on April 28, 2021 at 1:45 am

    How to reduce camara vibration

  8. Scott Tuttle on April 28, 2021 at 1:47 am

    in order to practice your flying skills you can get a usb cable for your controller and connect it to your pc and fly on a drone simulator.

  9. MC's Creations on April 28, 2021 at 1:49 am

    Fantastic project, dude! Really well done! 😃
    Pretty old school, but I love it! 😃
    And it IS homemade! There’s LOTS of different components you can choose, different motors and so on! For example, I’m about to build a "TBS Discovery" kind of quad, with the NAZA Lite and so on! 😃

  10. Ahmed on April 28, 2021 at 1:50 am

    Electronoobs is such a great guy. But I built an autonomous drone (no controller, only path commands) for only $82 with most parts from Aliexpress!

  11. 00000 00000 on April 28, 2021 at 1:51 am

    Bro and the project with arduino? Jaja

  12. 2E0LIG, Nathan on April 28, 2021 at 1:52 am

    Is there one with FPV?

  13. Start-x gaming on April 28, 2021 at 1:52 am

    Did you can deliver pcb in india

  14. Upcycle Electronics on April 28, 2021 at 1:57 am

    What’s the cheapest cheap option for getting started with RC hardware that can be messed with? The $10-$40 bare minimum?

    Recently, I saw someone mention that there’s no reason for anyone to "rewind old brushless CD ROM motors anymore to build their own drone." So apparently that was the old skool/grassroots way the hobby got started. Does anyone know about these grassroots projects, or references for how to build something like this from scratch?
    I’m more curious about the hardware side than actually flying the thing. Delving into motor windings, controllers, and such, sounds like a lot more fun than standing around twiddling my joystick. I might play around a bit if it were something I built, but I’d never spend even $100 to buy one.
    Thanks for the upload.
    -Jake

    Oh and because I typically mention hardware bits…have you checked out the AVR compatible chips out of China yet? I have been looking at some Ardy-like dev boards based on the LGT8F328P recently. Apparently they have some added features that the genuine AVR’s lack. I haven’t gone into the datasheet, but ordered a few after someone mentioned the chip has a DAC. I haven’t even confirmed this though. All AVR’s with an ADC actually have a DAC according to how the SAR ADC works. However I don’t think they ever designed an official AVR with a DAC broken out for peripheral use. It just might be an interesting chip to look into. I ordered some, especially the one version with the SOP-20 pin package 🙂

  15. check m8 on April 28, 2021 at 1:59 am

    Whats the fancy rc controller?

  16. Sumit Khobragade on April 28, 2021 at 1:59 am

    That’s esc is too bad ,it can burn any time

  17. Regular Guy Mountain Biking on April 28, 2021 at 2:00 am

    This was very cool. I honestly never knew you could do all this and the tools to build a drone. I’m a terrible pilot so I’m not sure if I should build this haha!

  18. Shridatt Dudhat on April 28, 2021 at 2:01 am

    This is so cool…. One suggestion please make video on freertos for Arduino….

  19. My Hobbies on April 28, 2021 at 2:05 am

    What about you own made brushless esc. Where are pcb design files,

  20. Marion Makarewicz on April 28, 2021 at 2:05 am

    This is the drone project I have been looking for. Thank you so much!

  21. Ban Chu on April 28, 2021 at 2:07 am

    For that money you can build 10 times better drone, all of this parts are outdated, especially frame …

  22. jaime trejo gallegos on April 28, 2021 at 2:08 am

    Great vídeo! I follow ur 2 chanels!, I wish a video where u make a DIYOpenTX transmitter, I found an schematic on internet, but the wiring diagram for the pots and switch’s are so confuse! Sorry for my bad English hahaha, tqm electronub

  23. uPe Tech on April 28, 2021 at 2:08 am

    Nice! Just ordered my first 3dprinter and im planning to build a drone but maybe ill have to do some more research.

  24. Koushik Datta on April 28, 2021 at 2:10 am

    Love your videos ❤❤❤❤.
    is it safe to use 5v step down module instead of BEC module?

  25. paramesh pavin on April 28, 2021 at 2:12 am

    nice drone project❤👍

  26. creative tube on April 28, 2021 at 2:13 am

    Please can you help me and check out this ic bd7995efs….. can I use it for esc

  27. Himanshu jangra on April 28, 2021 at 2:14 am

    You are genius I like to watch your videos 👍👍

  28. Mr Big on April 28, 2021 at 2:16 am

    Thanks u so much ! Do you have a shop to buy these parts to me ? I want to build a homemade drone

  29. H2O- FPV on April 28, 2021 at 2:18 am

    Good that u made this video I’m going to pay attention to everything to see if I can finish my drone a 220 frame . So is a small drone but everything looks promising lol oh by the way I have the same controller and still I think I havent set it up completely. Anyways thank u for the video.

  30. Rusiru Nerangjan on April 28, 2021 at 2:18 am

    Normally I use adblock when watching youtube, but when I watching electronoobs video first I disable adblocker.

  31. keith king on April 28, 2021 at 2:19 am

    I saw a cool cool looking arduino glove that controls a robot arm on banggood once. Could you see if you can get it👍

  32. Opu Stark on April 28, 2021 at 2:21 am

    Bro,, why there is always a banana in ur vedio……..??😁
    Ans pls… :–

  33. Ilan Goldberg on April 28, 2021 at 2:22 am

    Could You please add a link to the carbon fiber propellers?

  34. H2O- FPV on April 28, 2021 at 2:23 am

    Nice good video , ok I found what is my problem I got betaflight but I dont think I downloaded load a few things to make it work. So I’m on that part dealing with betaflight. Thank u.

  35. KRE KRE on April 28, 2021 at 2:24 am

    BRO YOU ARE THE BEST — EVERYTHING ABOUT YOU — ALSO YOUR ENGLISH IS BETTER THAN MOST ENGLISH PROFESSORS IN USA – GOOD FOR YOU!!!

  36. Madan Dhir on April 28, 2021 at 2:24 am

    Really great video man.👏👏
    Could you make a video on a single propellor drone…!!!!!
    I would really appreciate that.

  37. Abolfazl Abbasi on April 28, 2021 at 2:25 am

    thank you for tutorial
    how did you set the PID values in this project ?

  38. Padmanabhan Rajesh on April 28, 2021 at 2:25 am

    This is totally outdated.The naze32 has a slow f1 processor. It has changed to f3,f4 then f7 and finally the recent sp racing h7 by seriously pro is using a 400MHz H7 processor.The baseflight configurator is also a dead one.

  39. Marc Salat on April 28, 2021 at 2:26 am

    This drone is TOTALLY out of date… please, don’t build it.

  40. member khan on April 28, 2021 at 2:26 am

    I want on pic gift me

  41. Englebert Lai on April 28, 2021 at 2:28 am

    Very astonishing…Keep it up.

  42. Henry Rey on April 28, 2021 at 2:29 am

    Even thought this was not a video as the ones you normally do, I appreciate this non DIY solution because not all of us want to invest a huge amount of time making the whole thing. Keep it up!

  43. shubham shukla on April 28, 2021 at 2:29 am

    Hwy buddy this flight controller is having drifting issues or not?

    Because i used KK and it was horrible..

    I am thinking about moving to cleanflight

    Let me know your opinion

  44. BISWARUP SAMANTA on April 28, 2021 at 2:31 am

    Hallo sir. Can please tell how make a drone in low price. We don’t have. So much money.

  45. Milan M on April 28, 2021 at 2:33 am

    Nesto mi deluje da si iz Srbije.

  46. jordabox ⦔ on April 28, 2021 at 2:35 am

    we need a 2021 version 🥺

  47. stilkus on April 28, 2021 at 2:35 am

    2:22 , you should work on your soldering skills bro, seriously#

  48. Ziad Jeeroburkhan on April 28, 2021 at 2:36 am

    I’m wondering what the load capacity of such a setup would be. Any ideas anyone?

  49. Nazir Ahmad Shah on April 28, 2021 at 2:36 am

    Use a f4 FC and u could use cheap racerstar motors which are way better than those ebay motors

  50. neosapien247 on April 28, 2021 at 2:37 am

    What is the name of those metal screw thread thingies?

Leave a Comment