Easy – Bebop 2 drone Battery Conversion to Lipo/LIHV for cheaper – longer lasting batteries.

Easy – Bebop 2 drone Battery Conversion to Lipo/LIHV for cheaper – longer lasting batteries.

This video is to give more clarity as to how the LIHV battery is installed into the Bebop 2.

(Build video to follow shortly)

This battery gives up to 30 mins flight time, requires no modifications to your drone.

Parts Needed

1x GIFI or Aftermarket Bebop 2 battery housing.

1x XT60 Connector

1x LIHV Turnigy Battery 3000mah

LIHV Specifications:

Capacity: 3000mAh
Configuration: 3S1P / 11.4V / 3Cell
Constant Discharge: 12C
Peak Discharge: 24C (10sec)
Pack Weight: ~199g
Pack Size: ~107 x 35 x 29mm
Charge Plug: JST-XH 
Discharge plug: XT60 

Batteries purchased from this seller (UK only)
https://www.ebay.co.uk/itm/Turnigy-LiHV-3000mAh-3S-11-4V-12C-24C-Lipo-Battery-XT60-2200-4000-5000-RC-/174369567901?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=710-127635-2958-0

You will also need a battery charger specifically designed to charge LIHV batteries.

Any questions, please ask in the comments.

2 Comments

  1. Barend De beer on August 30, 2022 at 8:32 pm

    I almost did the same with mine. What are the battery specs and where to buy some? Mine is a 2500 mah 11.1v 40c and gives me only 15min flight time.

  2. shawn G on August 30, 2022 at 9:11 pm

    What are you using to charge them the extra bit? I wondered if you can use the calibration settings on a standard B6 to get up to 11.4v?

Leave a Comment