DIY Mini FPV Race Quad | Flite Test

DIY Mini FPV Race Quad | Flite Test

Add FPV to your Blade Nano and Inductrix mini quad and some tips for making your own mini FPV race course using the Hyperion Mini 600 TVL Camera System.
http://flitetest.com/articles/diy-micro-fpv-race-quad

Learn more about the Hyperion Mini FPV Camera:
http://store.flitetest.com/hyperion-mini-600-tvl-camera-w-built-in-5-8ghz-25mw-vtx/

The PDF template for the mini World Drone Prix race gates are available in the writeup here:
http://flitetest.com/articles/diy-micro-fpv-race-quad

Here are some of the Mighty Mini Airplanes mentioned in this episode!

FT Mighty Minis!

FT Mighty Mini Arrow

FT Mighty Mini Sparrow

Eric Monroe’s basement FPV flying (Full Video):
http://www.youtube.com/ericmonroesshd

Thanks for watching!

50 Comments

  1. Weetod on November 9, 2021 at 9:47 am

    how do you record it??

  2. 909 FPV on November 9, 2021 at 9:49 am

    visit my channel if you want to see the cheapest micro acro racer available yet ( custom , diy )

    nice video btw, i love this little brushed racers 🙂

  3. White Mark Drone Photography on November 9, 2021 at 9:52 am

    why is the vimeo advert across the screen.

  4. Rad1analex737 on November 9, 2021 at 9:52 am

    Lel so you don’t need to get new motors and frame for the inductrix

  5. Hendrik Janssen on November 9, 2021 at 9:55 am

    wich of the the two shown quads is the best for fpv indoor flying ?

  6. rYu FPV on November 9, 2021 at 9:55 am

    the camera mount on the inductrix in that way with hot glue, does it come off easily after multiple crash? seems fragile. how about the central gravity?

  7. 2WHEEL [HOON] on November 9, 2021 at 9:55 am

    you should sell these on flight test

  8. Joshua Walters on November 9, 2021 at 9:56 am

    Can this be applied to the Syma SX5?

  9. ovak on November 9, 2021 at 9:56 am

    0:51 finish that plane!

  10. Caleb Abrantes on November 9, 2021 at 9:57 am

    Can this work for any quad?

  11. Johnathon Darts on November 9, 2021 at 10:00 am

    Hi flitetest I have an eachine e010 quad, and it’s very underpowered to me now. My question is, is there a way to switch the brushed motors to micro brushless motors. Like for example am I able to take it apart, put all the components on a carbon fiber micro quad frame and still get to fly using brushless motors or is it impossible?

  12. Markitos203 on November 9, 2021 at 10:01 am

    Register a toy LMFAO government is such a joke..

  13. Kookoocachoo on November 9, 2021 at 10:01 am

    So where are the escs on a micro quad? Are there any?

  14. Sajiv Shah on November 9, 2021 at 10:03 am

    do you need fatshark goggles to receive video feed or can u just get a 5.8 mhz receiver and hook it up to a monitor?

  15. TBNR LD on November 9, 2021 at 10:03 am

    you should sell those gates and stuff on your store

  16. Zombie Drone on November 9, 2021 at 10:03 am

    Eachine just made a  Micro FPV Raicng Quadcopter With 800TVL 40CH comes with transmitter for only $36 not going to get any cheaper then this believe me I was lookinghttp://www.banggood.com/Eachine-E010C-Micro-FPV-Raicng-Quadcopter-With-800TVL-40CH-25MW-CMO-Camera-45C-Battery-p-1110786.html?rmmds=newArrivals/?p=QF302371176792016104

  17. Josh Brodsky on November 9, 2021 at 10:06 am

    Can you post the plans to the race course?

  18. Julian Golden on November 9, 2021 at 10:06 am

    did they hot glue the camera?

  19. FL!P FPV on November 9, 2021 at 10:06 am

    Hey crew,
    Just wondering if you guys have any info on Binding the nano qx with a Taranis? I have the orangeRX Module…Thanks heaps!!!

  20. nilsbeuschlein on November 9, 2021 at 10:08 am

    how are those track things called? awesome

  21. Tvpath on November 9, 2021 at 10:11 am

    4:45 if a blade hits a monitor, the display could break omg

  22. Tim Cuatt on November 9, 2021 at 10:12 am

    WAIT A DANG MINUTE. IS THAT FUSELAGE A PROTOTYPE FOR PETER’S ULTRALIGHT?

  23. tempurarocky on November 9, 2021 at 10:14 am

    I made a flying fpv brick!

  24. Gyraaa on November 9, 2021 at 10:15 am

    Guys need help: i removed my e010 prop guard and it cant carry aio fpv camera… Why??

  25. Imad Morsli on November 9, 2021 at 10:16 am

    i plan on doing it with the inductrix and an eachine fpv system

  26. C Armentrout on November 9, 2021 at 10:19 am

    I built on a while ago, then it got ran over by a car the next day. I felt like I got ran over because the camera was facing the Car.

  27. Jonathan Pease on November 9, 2021 at 10:19 am

    This is the "Original" Tiny Whoop. It’s good that the Tiny Whoop is getting a lot of attention, but everytime I see one I know that Flite Test was the original creator. So Team Big Whoop is getting all the attention for these, but I just wanted to say THANK YOU Flite Test for all that you do. For coming up with new ideas and pushing this hobby to the next level!

  28. Mike Sera on November 9, 2021 at 10:26 am

    Is the inductrix more reliable than the fpv nano? because when I got my fpv nano it flew like a sack of bricks.

  29. Kyosanym on November 9, 2021 at 10:27 am

    Is the camera soldered to volt in or is there a specific place?

  30. jfklazarus on November 9, 2021 at 10:28 am

    hi flitetest, quick question, can you use ipod touch on mavic and phantom 4 pro?

  31. tweak114 on November 9, 2021 at 10:30 am

    what is a good cheep screen or headset to view the fpv on ?

  32. Patros66 on November 9, 2021 at 10:31 am

    Hi ther , can you please tell me how long can you fly the Indructrix by using this FPF Cam on it ?
    I have this to but after 1 min the 150 mah ar so low that the safemode stop the fun .

  33. steve Dobbs on November 9, 2021 at 10:31 am

    can you do a vid on how to since the camera with your receiver

  34. Shahriar's TechGallery on November 9, 2021 at 10:31 am

    wow. this amazing.
    I love it.
    I have this type of video.

  35. Hugo Dailgle on November 9, 2021 at 10:31 am

    wow wish to live near you to share my experience and learn all your knoledge. In montreal we doesn’t have club or a big drone communities 🙁

  36. Connor O'Brien on November 9, 2021 at 10:31 am

    Hay can you stream these camera to your phone

  37. JSD on November 9, 2021 at 10:33 am

    this is awesome!

  38. Walker Freel on November 9, 2021 at 10:33 am

    How do you record video off of the blade inductrix?

  39. DauntlessFPV on November 9, 2021 at 10:35 am

    People have

  40. Julian Golden on November 9, 2021 at 10:35 am

    I mounted mine on the top and it doesn’t fly do I need bigger motors?

  41. Bobster986 on November 9, 2021 at 10:37 am

    I really like we’re you placed the camera under the drone, I have a similar camera with a clove leaf antenna and I’m afraid it’s going to break off the moment I crash, your way looks like it would help protect it from snapping off in a crash. Thank!

  42. Josh25 FPV on November 9, 2021 at 10:37 am

    can this possibly work for an eachine h8 mini? cuz that would be stupid fun to bash that around the yard with FPV on it

  43. Beaux on November 9, 2021 at 10:38 am

    Hi guys, I am wondering if this little fpv camera also works on any regular cheap mini quadcopter. I mean, it’s sounds to easy and to good to be true to only connect the wiring to the + and – pole (mirrored) on the other side of the board. I flew loads small/tiny quads, could I really make one FPV? Just by soldering that on? Would be awesome!!

  44. Vlad Kolevinski on November 9, 2021 at 10:39 am

    please create the vulture from halo

  45. FarmLife on November 9, 2021 at 10:41 am

    i have the fxt 798t mini fpv camera but it wont work

  46. Technical tejo on November 9, 2021 at 10:42 am

    price of diy micro 5.8ghz camera

  47. John Marvel on November 9, 2021 at 10:43 am

    cool video,,,can you give me a link,,,for the helping hands bead kinda thing you guys use for soldering,,,, ive been looking for that kind with the ball like joints,,,,thanks.

  48. Patrick Samuel on November 9, 2021 at 10:43 am

    One of the link says : Page not found

  49. Hobby Zoo on November 9, 2021 at 10:44 am

    cool i like mini quadcopter ,and diy some .welcom to my channel

  50. Twiztedmind864 on November 9, 2021 at 10:45 am

    Are those race gate plans ever going to be uploaded?

Leave a Comment